welded wire mesh

The welded wire mesh is made of high-quality cold-drawn wire rods and is processed in the steel processing factory. The wire rods are straightened with a suitable steel bar straightening machine, and then cut into steel bars. The size of the building mesh is based on the arch. The frame spacing and the overlap length between the meshes are combined to reflect the problem.

Before the steel wire is welded, it is required to clean the oil stains, lacquer stains, and Shimin soil slurry of the steel wire with a hammer and a peeling floating skin, rust, etc.; the construction mesh after the processing is finished should be flat, and the steel surface has no weakened steel profile. scar.

When you store the building net for a while, you must lift it gently to prevent the ground from being damaged. The finished products of the construction mesh should be kept away from the processing site, stacked on the finished product stacking site, during the storage and transportation process, to prevent the background of the moisture, to avoid rust, pollution and deformation.