How to strengthen the slope protection chain link fence

How to strengthen the slope protection chain link fence?
The installation of the slope protection net requires some necessary accessories: an energy absorption ring consisting of a steel ring and a retainer; a threaded steel rivet; a steel wire mesh consisting of a steel mesh and a rope card; various hardware and standard components consisting of H steel And steel columns. If it is a soil slope, we should look at the rock layers below and the slope and slope topography. See if there are dangerous rocks, collapse, and easy to collapse.

Because it is necessary to straighten the force when hanging the net construction in the back, the column needs to bear a large pulling force. In order to prevent the bending of the lines caused by the soft characteristics of the chain link, it is generally necessary to pull a long 8 wire between the tops of the columns.
Then, the key to this talk: the connection between the ends. This requires a piece of hook-and-eye net (which can be split into a single wire) without twisting the edges when the goods are needed, and the connection needs to be completed.
Next, spread the hook flower net on the ground, and put the 8th line into the burrs on the top of the chain link net. The iron wire is placed in the special hook at the top of the column and tightened and fixed. Tighten by first fixing one end on the column, then pulling the chain link net to the other end, and then going down until it reaches the end.