How to connect the chain link fence installation

Chain link fence, also called hook fence, is the main part of chain link fence. It is generally divided into several meters or ten meters in length for transportation, and then cleverly connected to form a whole during installation. The specific methods are as follows:

First of all, we install the column according to the predetermined position (usually at a distance of about 3 meters). There are two installation methods: flange and pre-embedded. No matter which one is, it must be fixed firmly, because it is necessary to hang the net behind the construction. To straighten hard, the column needs to bear a lot of tension. In order to prevent the bending of the lines caused by the soft nature of the chain link fence, a long No. 8 iron wire is generally drawn between the tops of the columns.

Next, lay the chain link fence flat on the ground, thread the 8th wire into the burrs sealed on the top of the chain link fence, put the iron wire into the special hook on the top of the column and tighten and fix it. The chain link fence should also be Tighten, the method is to fix one end on the column first, and then stretch the chain link fence to the other end, in turn, until it reaches the end.

Then, the key to this lecture: the connection between the terminals. This requires a piece of chain link fence (which can be split into a single wire) from the manufacturer when the goods are ordered, and the connection needs it to complete. Rotate the disassembled single wire and thread it into the two ends for connection. After the completion, there is no trace of the connection, which is amazing.

Uses: Chain link fence is also known as chain link fence. It is rigid and flexible, and can withstand strong impacts. It is mainly used for stadium fences, zoo fences, ranch protection, breeding fences, etc.