Fence Design

Fence Design

(1) Consists of uprights, diagonal braces, isolation nets, connectors, foundations, etc. The entire isolation net can be laid continuously, and the net can be tightened with tensioning equipment; it can also be set up in pieces. When the entire isolation net is continuously laid, the continuous connection of the net and the pillars is generally carried out by hooking.

(2) The installation height of the fence net should be determined according to different terrains and dense conditions of villages and towns.

(3) The columns of the fence net can be steel or reinforced concrete columns. Its cross-sectional dimensions, and basic method of connecting strut embedment depth can be determined by the calculation according to different situations.

(4) The fence net should be opened at an appropriate place according to the needs of maintenance management. Where the door opening should be located in order to control access.

(5) Fence Case of little small ditches and small culverts flow measures can be taken directly across the general method can be used.

(6) fence in the topography of the area is set, the ground can be renovated into a certain vertical gradient, it is designed to isolate downslope settings.